12 Biodex Medical Systems, Inc. © 2018
3.
Place the Atomlab 500 Dose Calibrator WIN CE Display on the larger support shelf. The
Atomlab will be held in position by the shelf’s front lip.
Installing the Dose Calibrator Interface Module onto Tablet Shelf Mounted on Arm:
1.
Using a Phillips head screwdriver, remove the four 6-32 SST screws and the mounting clips
from the bottom of the Atomlab 500 Interface Module and discard them (see Figure 2.5).
Figure 2.5.
Removing Screws and Mounting Clips from Interface Module.
2.
Place the four 6-32 x .38” SST screws provided with the Tablet Shelf through the openings
on the bottom of the Tablet Shelf up into the Interface Module (see Figure 2.6). Using a
Philips head screwdriver, tighten the screws until the Interface Module is fully supported.
Figure 2.6.
Attaching the Interface Module to the Tablet Shelf.
