biodex 058-702, Руководство по эксплуатации, Страница: 22 / 35

2-10 ECHO/VASC PRO VASCULAR ULTRASOUND TABLE
I.V. Pole (058-737)
The optional I.V. pole must be installed on the patient's right side of the table.
Installing the I.V. pole:
1. Using a 7/16" wrench, remove the two 1/4-20" hex head screws from the end of
the tabletop frame on the side of the table to which the I.V. pole will be installed.
2. Position the I.V. pole support bracket against the side frame so the two pre-drilled
screw holes in the bracket align with the screw holes on the tabletop frame. The
I.V. pole should face up and toward the head end of the table.
3. Using a 7/16" wrench, install the two screws removed in step 1 through the I.V.
pole mounting bracket. Tighten the screws to secure.
4. Insert the I.V. pole into the I.V. pole mounting bracket. Ensure that the I.V. pole
passes through both the top and bottom holes in the mounting bracket to ensure
I.V. pole stability.
Figure 14 . Installing the I.V. pole.