Nuts
Installation & Trial operation
Remove the seat from the existing
toilet body.
Remove the water feed pipe and
then install T-valve.
Fix the bracket onto the toilet
first.
Push the main body toward the
bracket completely.
Release the nuts, and then remove the seat and cover
from it.
Keep the removed seat, cover and nuts well in a proper
place in case of using them again.
Removal of
water feed valve
Installation
of T-valve
Top fix metal bolt
Top fix rubber nut
Catch plate
Bracket holder
Washer
Adjust the seat and the front part of toilet back and
forth so that they can correspond with before
fastening the nuts.
Push it in until it sounds ‘click’
When the product is not installed well, it may cause
leakage.
After installing the filter onto the
T-valve, connect the bidet-use hose
to the bidet body.
Be sure of no leakage around the
hose connection.
Be sure that the nozzle comes
out and retracts when powered on.
Don’t plug the power cord with wet hands.
Risk of electric shock.
Align
