ENGLISH | 9
FILLING WITH WATER
1.
2.
Make sure power cord is unplugged from electrical outlet.
3.
Cautiously remove Boiler Cap by unscrewing it in a counter-clockwise direction, and lift it off.
4.
Boiler should always be emptied after each use. If it was not emptied after the previous use,
.
5.
Fill included Measuring Cup with 250 ml of water.
NOTE: In order to extend the life of your Handheld Steam Cleaner and keep it functioning
at it’s maximum potential, it is highly recommended that distilled or de-mineralized
water be used in Boiler.
6.
NOTE: Do not exceed the Boiler’s maximum capacity of 250 ml. This will ensure
7.
Replace Boiler Cap, screwing it in a clockwise direction to tighten. Make sure it is screwed on
securely to prevent hot water or steam from escaping.
REFILLING
When adding water to the Boiler after the unit has been in use, always follow these
additional safety precautions:
1.
Unplug power cord from electrical outlet.
2.
Allow a minimum of 5 minutes for Boiler to cool.
3.
Press and hold Steam Button to release any leftover steam pressure.
4.
Slowly remove Boiler Cap and add water as outlined in Steps 3-7 of
Filling with Water
procedure above.
CAUTION: Boiler may contain some amount of water that is still hot – use care when
WARNING: Extreme caution should be used when pouring water into a Boiler that was
recently heated – cool water introduced into a warm Boiler may result in a small burst of
hand and any children or pets at a safe distance.
Using Your
Handheld Steam Cleaner
Содержание BioMIST EM-307
Страница 15: ......
