©2011 BioSmart Technologies
Page 16
Operating the UV Air Filtration system.
This unit is designed to be run
with
or
without
UV processing and air
purification. In order to activate the TIO2 membrane, ionizer and UV emitter
for maximum benefit of the air filtration system, it is necessary to turn the
system on by pressing the ENTER button on the control panel or the remote
control.
Pressing the ENTER button will sequence you through three options. You can
choose to operate heater without the air purification by pressing the ENTER
button and the appropriate LED lights on the front of the control panel will
indicate that just the heater is operating.
You can choose to operate just the air purification year ―round without the
heater on by pressing the ENTER button and the appropriate LED lights on the
front of the control panel will indicate that just the air purifier is operating.
Lastly, you can push the ENTER button again and the LED lights on the front
control panel will indicate that both systems are operating simultaneously.
When both systems are turned on simultaneously, the UV and ionizer operate
when the fan turns on to circulate the air through the heater. When just the
air purifier is turned on, the fan operates full time on High or Low and the UV
and ionizer remain on continuously.
Detailed Operating Instructions
UV Indicator
BIO-1500WA
BIO-1500PA
