BIO RAD PowerPac Скачать руководство пользователя страница 17

Appendix B
Warranty and Ordering Information

Warranty

The PowerPac Basic power supply is covered by a standard Bio-Rad Laboratories

warranty. Contact your local Bio-Rad representative for details of the warranty. If any

defects should occur during this warranty period, Bio-Rad Laboratories will replace the

defective parts without charge. However, the following defects are specifically excluded:

1. Defects caused by improper operation.

2. Repair or modification done by anyone other than Bio-Rad Laboratories or their 

authorized agent.

3. Use with cables or connectors not specified by Bio-Rad Laboratories for this power

supply.

4. Deliberate or accidental misuse.

5. Damage caused by disaster.

For inquiry or request for repair service, contact your local Bio-Rad office.

Warranty Informatio

n

Model: _____________________________________________________________________

Serial Number: ______________________________________________________________

Date of Delivery: _____________________________________________________________

Warranty Period: _____________________________________________________________

Ordering Information

Catalog 
Number

Description

164-5050 

PowerPac Basic power supply, 100–120/220–240V

165-5061 

PowerPac Adaptor, qty 1

165-5066

PowerPac Adaptor, qty 2

900-7283

Replacement Fuse, 2.5 A, 250 V, 5 x 20 mm, 1 ea

11

Содержание PowerPac





















Отзывы: