Page 14 of 42
Upon completion of the Camera installation, refer
to Section 4.2.3
and
Appendix A
for a
complete description of the cable connections.
ChemiDoc
XRS
a) Place the Camera on the bench so that the locking hole of the tripod mount is facing you.
b) Fix the ChemiDoc
XRS bracket to the Camera, do not tighten the screw.
c) Place the black adapter ring (6 millimeters thickness) on the top of the hood with its soft
side facing up.
ChemiDoc
XRS Camera with bracket
Black adapter ring for ChemiDoc
XRS Camera and its positioning on the top of the Hood
d) Position the ChemiDoc
XRS Camera over the opening on the top of the enclosure by
inserting the lens through the adapter ring. Make sure that the lens is in close contact
with the black adapter ring. Adjust the Camera position such the lens is well centered in
the opening of the hood (see below).
Tripod Mount
