BIO-MED DEVICES Crossvent-2i+, Руководство по эксплуатации и обслуживанию, Страница: 16 / 97

III. S P E C I F I C A T I O N S , C O N N E C T I O N S A N D U S E R I N T E R F A C E - C O N T .
11
B- SPECIFICATIONS
Parameter Range Resolution of Display Accuracy
CMV Rate 1- 150 bpm 1 bpm ±10%
SIMV Rate 0.6- 50 bpm 0.1 bpm below 1, 1 bpm above 1 ±10%
CPAP Rate 5- 150 bpm 1 bpm ±10%
Tidal Volume 5- 750 ml 1 ml below 200; 10 ml above 200 ±10%
Inspiratory Time 0.1- 3.0 .05 below 1.00, 0.1 above 1.00 ±10%
Flow Rate 1- 15 lpm 0.1 lpm below 10; 1 lpm above 10 ±10%
Peak Pressure (PIP) 0- 80 cmH
2
O 1 cmH
2
O ±3% FS
PEEP Pressure 0- 20 cmH
2
O 1 cmH
2
O (above baseline) ±3
Flow Trigger 1- 20 (scale) 1 unit N/A
Pressure Support 1- 50 cmH
2
O 1 cmH
2
O (above baseline) ±3
O
2
Sensor 0- 100 % 1% ±3% FS
EXHTV 0- 1300 ml 0.1 ml below 50; 1 ml from 50-200, 10 ml thereafter ±15%
1
EXHMV 0- 45 L 0.1 L below 10, 1 L thereafter ±15%
1
1. Readings below 10 ml may be considered relative rather than absolute values.
2. NOTE: All values are expressed under ATPD conditions (ambient temperature & pressure dry)
C- ADDITIONAL SPECIFICATIONS
Base Flow 2.5 lpm
Continuous Flow 1 – 15 lpm
Maximum Safety Pressure: 96 cmH
2
O
Pneumatic Power Source 17 – 55 psi (117 kPa – 380 kPa)
Audible Alarm Characteristics 90 dB at 10cm (25°C)
Electrical Power Source
See Appendix E
Output: 16.0 VDC, 3 A
Output Protection: Short Circuit and Overload
Isolation: Meets IEC601.1, classification BF, UL 544 Patient Care, CSA 125 Risk Class
2G
Maximum Ripple: <100 mVp-p
Safety: Approved to UL 544/2601.1, CLU (CSA) 22.1 #125/601.1, TUV
EN60601.1 & CE LVD
EMC: Designed to Level B Requirements of FCC part 15, CISPR11 (EN55011).
Less than 1 Volt Output Deviation for IEC801-2, 3, 4, 5, Immunity Tests.
Overall Dimensions
Height: 7.5" (191 mm)
Width: 8.4" (213 mm)
Depth: 4.4" (112 mm)
Weight: 7.65 lbs. (3.5 kg)
Operating Temperature: 32 to 104 degrees F. (0 to 40 degrees C)
1