5
•
Remove the
Bio-Logic
®
Pure Water Pack
™
from shipping carton.
•
Atlantic Ultraviolet Corporation takes all possible
precautions when packaging this unit to prevent
damage. Carefully inspect the water purifier, power
cord and plug for damage, report all damage
immediately. Do not assemble or operate if there is
any damage, visible or suspected.
•
Units occasionally experience damage in shipment
due to the fragility of the quartz sleeve, it is
recommended that the water purifier be inspected
for damage to the quartz sleeve. Each end of the
unit should be viewed to see if the quartz sleeve has
experienced damage. If the quartz sleeve shows
signs of damage it should be replaced before the
purifier is pressurized. See “
Quartz Sleeve
Cleaning or Replacement
” in the “
Maintenance
”
section for the proper method of replacing the quartz
sleeve in your water purifier.
•
The
Bio-Logic
®
Pure Water Pack
™
is shipped
with the lamp packed separately. Keep the lamp
aside for installation once the
Pure Water Pack
™
has been properly installed.
•
Carefully inspect all packing materials to prevent
the loss of accessories, mounting hardware, spare
parts or instructions.
•
Do not discard packing materials until unit is
assembled and check out is complete.
•
The
Bio-Logic
®
Pure Water Pack
™
includes:
•
Pure Water Pack
™
system, with installed:
•
Bio-Logic
®
Ultraviolet Water Purifier
•
Associated mounting brackets
•
10" Filter Housings
•
5 micron Sediment Filter Cartridge
•
Activated Carbon Filter Cartridge
•
Saddle Valve with hardware
•
Stainless Steel Faucet with hardware
•
John Guest
™
¼" OD Tubing Connectors
•
1/4" OD Tubing, 24-inches long
•
1/4" OD Tubing, 15-feet long
•
120v 60Hz, 220v 50/60Hz or 12v DC Ballast
•
Ultraviolet Germicidal Lamp
•
Filter Housing Wrench
•
Operating Instructions
Figure 2 -
Bio-Logic
®
Pure Water Pack
™
- Drinking Water System
UNPACKING
