Bio Fireplace Group Foco 1000, Руководство по установке

Страница: 8 / 46

8
3.1.2 Insulation board
a) Cut your insulation boards into size, so that they will fit into your framework. Fasten them using a power drill and
screws.
The insulation board is sold separatelyand and can be purchased at your local hardware shop. See
2.2 Definition
for
more information about insulation boards.
The idea of the insulation boards is to create a heat-resistant spacer between the wooden wall frame and the fireplace
frame so that there is no direct contact. If the framework is made of a non-flammable material like e.g. steel the insula-
tion boards are not needed.
1
Can vary depending on burner type. The dimensions shown are for a standard manual burner. Please check your
specific required burner cutout size, if your fireplace is equipped with another burner.
2
IMPORTANT - If you want the finished wall to go flush with the fireplace frame, you need to subtract the thickness
of the wall finishing materials from the dimensions of the framework. This will make the Foco frame protrude from the
framework equivalent to the thickness of the wall finishing material. See 3.1.3 for more information.