Bio-Circle G50030, Руководство по эксплуатации

Страница: 48 / 94

Operating instructions BIO-CIRCLE GT Compact – English
48
5. Start Up
After removing the packaging, check the casing and control for any possible transport damage. Should
transport damage be detected, do not connect the machine to the mains. Instead report the damage
to the carrier and to Bio-Circle Surface Technology GmbH. The original packaging must be retained.
Place the unit in a dry and stable place of your choice. The ground must be even. If necessary
level the ground out with suitable material. Ensure that the drain valve is closed. Use only the
genuine BIO-CIRCLE L Cleaning Liquid. To fill to the optimum volume, 100 l should be required.
Do not overfill!
Other cleaning liquids, such as cleaner solvents, disinfectants and alkaline cleaner, for ex-
ample must not be used!
Connect the unit to the electricity supply.
Please ensure that the current entry provided by the customer is furnished with an ELCB (Earth
Leakage Circuit Breaker - FI switch).
Note: Do not connect to the power supply with no liquid inside the machine.
The heater starts to warm up the cleaning liquid to operating temperature.
Allow heater to warm BIO-CIRCLE L solution to working temperature for optimal cleaning efficiency.
When the solution has reached its proper working temperature of approx. 41º C (This will take approx.
4 hours with a liquid at 20 °C), periodically, the heater will turn itself ON.
Never turn off the BIO-CIRCLE unit unless for servicing or longer periods of non-use (more than
two weeks, see chapter 6. Operation instructions). Once the correct temperature has been reached,
the unit is ready for use.
On/Off
Power switch Pump