Binzel Neutrix, Инструкция по эксплуатации, Страница: 9 / 12

Page 9
6.2 How to grind the electrode
!
Turn the electrode holder, whilst pushing the electrode against the
diamond wheel. Do not push too hard in order to avoid blueing of the
electrode. This can be viewed through the inspection cover
!
The grinding is completed when the stop of the electrode holder (14)
touches the end face of the electrode holder guide (6).
!
Switch off the motor and remove the electrode holder when the motor has
come to a complete stop.
!
Place the electrode holder in the depth setting gauge. Turn anti clockwise
and the electrode can be removed.
Recommended turning speed
Diam. of the electrode 1.0 mm 1.6 mm 2.0 mm 2.4 mm 3.2 mm 4.0 mm
Speed adjustment 6 6 5 5 4 4
Note: Do not press too hard at the electrode holder before the stop (14)
has been reached.
Remember to put the electrode holder into the grinding chamber
before you start the machine and to keep it there until the motor
has stopped. (Otherwise grinding dust may come out of the
chamber).