BINZEL-ABICOR 881.3112, Руководство по эксплуатации

Страница: 38 / 108

EN - 12
6 Putting into operation M-Drive
6.7 Power supply
The power is supplied via the e BOX.

Please see the information in the e BOX operating instructions BAL.0388.0.
6.8 Feeding in the wire
1 Open the cover (2) on the M-Drive (4) .
2 Fold the pressure lever (3) outward and open the pressure rockers (5) .
3 Undo the start of wire on the wire basket spool.
4 Feed the wire through the wire inlet (8) over the wire feed rolls (7) and into the euro central
connector (6) .
5 Close the pressure rockers (5) and fold the pressure lever (3) back to upper position.
6 With the cover (2) open, press the Inching trigger (1) to feed the wire through the wire guide (cable
assembly or Masterliner) into the process-side drive.
1 Inching trigger S7
2
Cover
3 Pressure lever
4 M-Drive
5
2 pressure rockers
6 Euro central connector
7
Wire feed rolls
8 Wire inlet
9
Safety switch
Fig. 8 Feeding in the wire
2 3 4
6 7 8
5
1
9
NOTICE
• Set the key-operated switch S1 on the eBOX to MANUAL.
Otherwise, the inching function cannot be used if the cover is open.