XAir
Getting Started
63
Connection to the Power Supply
10
10
The Basic Configuration
This chapter describes which steps have to be performed in order to assign an
IP address to your
XAir
via the BinTec
XAir
Manager.
To configure an IP address for your
XAir
, carry out the following steps:
➤
Insert the supplied floppy disk into the drive of the computer.
➤
Copy the file xairm.exe to the computer.
➤
Start the BinTec
XAir
Manager by double-clicking the file xairm.exe.
The following dialog box opens:
Figure 10-1:
The BinTec
XAir
Manager
➤
Select
XAir
➧
Discovery.
The PC which you use to configure the IP address for your
XAir
has to be con-
nected to the same network as
XAir
to be configured.
If you use a laptop without CD-ROM drive, copy the file xairm.exe to floppy-
disk and place the floppy-disk into the appropriate drive of your laptop.
