Field
Description
•
Point-to-point
: Point-to-point ISDN access
The Advanced Settingsmenu consists of the following fields:
Fields in the Advanced Settings menu
Field
Description
X.31 (X.25 in D Chan-
nel)
Select whether you want to use X.31 (X.25 in the D channel)
e.g. for CAPI applications.
The function is activated with
Enabled
.
The function is disabled by default.
X.31 TEI Value
Only if X.31 (X.25 in D channel) is enabled
With the ISDN autoconfiguration, the X.31-TEI is detected auto-
matically. If the autoconfiguration has not detected TEI, you can
manually enter the value assigned by the exchange.
Possible values are
0
to
63
.
The default value is
-1
(for automatic detection).
X.31 TEI Service
Only if X.31 (X.25 in D channel) is enabled
Select the service for which you want to use X.31 TEI.
Possible values:
•
CAPI
•
CAPI Default
•
Packet Switch
(default value)
CAPI
and
CAPI Default
are for using X.31 TEI for CAPI ap-
plications. For
CAPI
, the TEI value set in the CAPI application is
used. For
CAPI Default
, the value of the CAPI application is
ignored and the default value set here is always used.
Set
Packet Switch
if you wish to use X.31 TEI for the X.25
device.
Funkwerk Enterprise Communications GmbH
6 Physical Interfaces
bintec R200 Series
121
