elmeg D131 / en / elmeg D131_V1 / netservices.fm / 10/19/15
Te
mplate Go
, V
e
rsion 1
, 01.07.2
014
18
elmeg D131
bintec elmeg
Network services
Network services
Network services depend on the network provider (service provider) and must be requested from that pro-
vider.
Network services fall into two distinct groups:
•
Network services that are activated when in idle status for the following call or all subsequent calls (for
example, "calling anonymously"). These are activated/deactivated via the
Select Services
menu.
•
Network services that are activated during an external call, (for example,"consultation call", "swapping
between two callers" and "setting up conference calls"). These are made available during an external call
either as an option or by using a display key (e.g.
Ext. Call
,
Conference
).
You will find a description of the features on your network provider's website or at one of their store
branches.
If you require assistance, please contact your network provider.
Calling Line Identification
During a call, the caller's number is transferred (CLI = Calling Line Identification) and may be displayed on
the recipient's display (CLIP = CLI presentation). If the caller's number is withheld, it will not be displayed to
the recipient. The call is made anonymously (CLIR = CLI Restriction).
Caller display for incoming calls
Calling Line Identification
The caller's phone number is displayed. If the caller's number is saved in the directory, the name is displayed.
No Calling Line Identification
Instead of name and number, the following is displayed:
•
External
: No number has been transferred.
•
Withheld
: Caller has withheld Calling Line Identification.
•
Unavailable
: Caller has not authorised Calling Line Identification.
Calling Line Identification for outgoing calls
Deactivating Calling Line Identification for the next call
¤
. . . use
to select
Select Services
OK
Next Call Anon.
OK
. . . use
to
enter the number
Dial
. . . the connection is established without Calling Line Identification
If your telephone is connected to a PABX, network services may also be available from the PABX.
Information is available from your PABX operator, where applicable.
To activate/deactivate the features, a code is sent to the telephone network.
¤
After a confirmation tone from the telephone network, press
.
It is not possible to reprogram the network services.
