elmeg D130 / engbt / elmegD130_en / starting.fm / 02.10.2013
V
e
rsion 1, 01.0
7
.2012
12
elmeg D130
bintec elmeg
First steps
¤
Insert the plastic cover provided for the headset socket to
ensure optimum sound in handsfree mode.
Attaching the belt clip
The handset has notches on each side to attach the belt clip.
¤
To attach
– press the belt clip onto the back of
the handset so that the protrusions on the
belt clip engage with the notches.
¤
To remove
– press the centre of the belt clip
firmly with your right thumb, push the finger-
nail of your left index finger up between the
clip and the housing and pull the clip in an
upward direction.
Initial charging and discharging of the batteries
The correct charge level can only be displayed if the batteries are first fully charged
and
dis-
charged.
¤
Charge the handset in the charging cradle for
8.5
hours
.
¤
After charging, remove the handset from the
charging cradle and only replace it when the bat-
teries are
fully discharged
.
Please note
The handset must only be placed in the desig-
nated base or charging cradle.
Please note
u
After the initial battery charge
and
discharge, you may place your handset in the base
after every call.
u
Always repeat the charging and discharging procedure if you remove the batteries from
the handset and reinsert them.
u
The batteries may warm up during charging. This is not dangerous.
u
After a while, the charge capacity of the batteries will decrease for technical reasons.
8.5 h