Cache size: 32 entries, Promotion zone: 6 entries
1
PERMIT
SRC=172.24.51.57/32
DES=172.60.1.163/32
Conn:0
Hits: 1
Extended Access List 101, assigned to IPSec
ACCESS LIST CACHE. Hits = 0, Miss = 0
Cache size: 32 entries, Promotion zone: 6 entries
Extended Access List 103, assigned to no protocol
ACCESS LIST CACHE. Hits = 0, Miss = 0
Cache size: 32 entries, Promotion zone: 6 entries
Access Lists>
3.1.2.2.2 LIST CACHE ADDRESS-FILTER-ACCESS-LISTS
Displays all the configured Access Control Lists and, for each, the entries in the cache that contain the subnet IP ad-
dress and mask included in the search pattern entered after the command. This command should be followed by oth-
er commands that specify the access lists to be displayed in further detail. If the IP address and mask entered are
0.0.0.0, all Access Lists are indexed.
Syntax:
Access Lists>list cache address-filter-access-lists <IPaddress> <subnet>
Example:
Access Lists>list cache address-filter-access-lists 172.24.51.57 255.255.255.255
Standard Access List 1, assigned to no protocol
Extended Access List 100, assigned to no protocol
ACCESS LIST CACHE. Hits = 2, Miss = 0
Cache size: 32 entries, Promotion zone: 6 entries
1
PERMIT
SRC=172.25.54.33/32
DES=192.34.0.0/16
Conn:0
PROT=21
Hits: 2
Extended Access List 101, assigned to IPSec
ACCESS LIST CACHE. Hits = 0, Miss = 0
Cache size: 32 entries, Promotion zone: 6 entries
Extended Access List 103, assigned to no protocol
ACCESS LIST CACHE. Hits = 0, Miss = 0
Cache size: 32 entries, Promotion zone: 6 entries
Access Lists>
3.1.2.2.3 LIST CACHE ACCESS-LIST
Displays all the entries in the cache belonging to one Access Control List.
Syntax:
Access Lists>list cache access-list <id>
Example:
Access Lists>list cache access-list 100
Extended Access List 100, assigned to no protocol
ACCESS LIST CACHE. Hits = 0, Miss = 0
Cache size: 32 entries, Promotion zone: 6 entries
1
PERMIT
SRC=172.25.54.33/32
DES=192.34.0.0/16
Conn:0
PROT=21
Hits: 2
Access Lists>
3.1.2.3 LIST ENTRIES
Displays Access Control Lists entries located in the active configuration. This command should be followed by other
commands that specify the information to be displayed in further detail. This command does not provide information
on the entries in the cache.
Syntax:
bintec elmeg
3 Monitoring
Access Control
41