BinTec BIANCA/BRICK-XMP, Начало работы

Страница: 24 / 30

BIANCA/BRICK-XMP
18
Once the switch type and channel fields are correct se-
lect [ Incoming Call Answering > ].
Incoming Call Answering
In this menu you will specify how your BRICK responds
to incoming ISDN calls and which services it will support.
To enable routing (i.e. to allow IP connections via
ISDN calls), use [ ADD ] to create a new entry and select
PPP (routing) in the Item field (using the spacebar). Then
enter one of your BRICK’s ISDN numbers (or an EAZ) in
the
Number field.
If you want to login to your new BRICK via the isdnlogin
program, you also need to create an ISDN Login entry. A
different Number must be specified. Normally, this is done
by using a different Multiple Subscriber Number (in Euro
ISDN) or a different EAZ (for 1TR6).
Once your entries are correct select [ EXIT ] to return the
[ CM-PRI, ISDN S2M ] menu; select [ SAVE ] to complete the
configuration of the ISDN interface and return to the main
menu.
BIANCA/BRICK-XMP Setup Tool BinTec Communications AG
[ SLOT 2 ISDN S2M ][ INCOMING ] : Incoming Call Answering mybrick
Item Number Mode Username
ADD DELETE EXIT
!