bintec elmeg RXM7000, Руководство по установке

Страница: 15 / 33

3.4 Plug-in Modules
Currently, only a 3G USB modem can be inserted in the device. To view the list of supported 3G modems, please go
to the following website: http://www.bintec-elmeg.com.
3.4.1 Installation
Simply insert the USB in the appropriate slot on the rear panel, as shown in the following figure:
Fig. 11:
USB modem insertion slot
3.4.2 Uninstall
To remove the device, simply pull it out from the slot where it was inserted. We recommend switching off the equip-
ment before removing the USB device.
3.5 Power Source
The RXM7000 router is powered through an internal AC/DC source.
The RXM7000 may also incorporate a card to inject PoE through the 4 ports of the 8-port Switch. In this case, an ex-
ternal adapter is needed to provide power to PoE module.
Warning
The equipment must be used with the power supply provided by the manufacturer.
Workplace Conditions. Main Characteristics
• Avoid humid and/or dusty locations.
• Direct exposure to sunlight and other heat sources should be avoided. The device should not be placed amongst
papers, magazines or other elements that could hinder natural air circulation.
• The device should not be placed very close to strong electromagnetic fields such as speakers, engines, etc.
• Knocks and/or strong vibrations should be avoided during transport, operation and storage.
Warning
The electric current in power cables, telephone lines and communication cables is dangerous. To pre-
vent electric shocks, before installing, handling or opening the equipment covers, connect and discon-
nect the cables following the steps set forth in
Connecting on page 12 and Disconnecting on page 12.
3.5.1 Internal Power Source
To connect the power supply to the device, please follow the steps under section Connecting on page 12.
To avoid electric shocks, residual current circulation and other unwanted effects that affect communications, the fol-
lowing is recommended:
Warning
All interconnected communication devices should be plugged to THE SAME GROUNDED POWER
OUTLET, which should at the same time be of good quality (lower than 10 ohms).
bintec elmeg
3 Components and Power Supply
RXM7000 11