elmeg IP630 / en / elmeg IP630 / settings.fm / 11/26/18
Te
mplate bin
tec-
e
lmeg
, V
e
rsion
1, 01.07
.2014
35
elmeg IP630
bintec elmeg
Basic settings
Restarting the phone
You can restart the device if required. All settings are retained.
¤
. . . Use
to select
Settings
OK
Reboot
OK
confirm prompt with
Yes
Resetting the device to the factory settings
A reset returns all the settings to the default settings. Network configuration, VoIP connections,
directories, call lists and all the individual settings are deleted or restored to the factory settings.
Resetting using the device keys
¤
Disconnect the telephone from the mains power supply
press the Control key
hold-
ing the key down, reconnect the device with the power supply
Displaying device information
The menu entry
Info
provides information about important settings on the telephone.
¤
. . . use
to select
Settings
OK
Info
. . . the following information is
displayed:
The function can only be run by the administrator.
You can back up your personal settings before a reset:
Device:
Telephone product name
SW Version:
Version of the firmware currently loaded on the phone.
Variant:
Country-specific version of the product
MAC Address:
The phone's device address.
IP Address:
The phone's current IP address within the local network. The IP address
is usually set automatically via a DHCP server in the network.
Subnet Mask:
The subnet mask for the local network. It specifies how many parts of
the IP address make up the network prefix and how many parts make
up the device address. The network prefix must be the same for all the
devices in the local network.
Standard Gateway:
IP address of the system in the local network which assigns the address
and forwards information to other networks. This is frequently a router.
Preferred DNS:
IP address of the system in the local network providing IP addresses
belonging to domain names.
There is more information about the settings and the status of the telephone in the
status display of the Web configurator (
