EN
77-3026-R2.5 (9/2016)
1 / 16
BINKS “TROPHY” SERIES
PRESSURE AND SIPHON FEED
HVLP, LVMP & CONVENTIONAL
MANUAL SPRAY GUNS
(2465-XXXX-XXXX)
Binks Trophy Series Spray Gun is the
premier spray gun for use in pressure and
siphon feed spray applications and sets a
new standard in durability, ergonomics,
and atomization. The lightweight
ergonomic design offers unsurpassed
comfort and control. The latest advanced
atomization technology has been
incorporated for achieving consistent, fine
finishes when spraying a wide range of
industrial coating applications.
Binks Trophy Series Spray Guns can be
used with pumps, pressure pots, pressure
cups, or siphon cups.
Binks Trophy Series Spray Guns are
offered in three different atomization
technologies: HVLP, LVMP and
Conventional.
SPECIFICATIONS
Maximum Air Pressure
140 psi / 9.6 bar (P-1)
Maximum Fluid Pressure
140 psi / 9.6 bar (P-2) (with standard spring)
Maximum Fluid Pressure
300 psi / 20.6 bar (P-2) (with optional spring)
Gun Body
Anodized Aluminum
Fluid Path
Stainless Steel
Fluid Inlet Size
3/8" NPS / BSP(m)
Air Inlet Size
1/4" NPS / BSP(m)
Gun Weight
14 oz. / 410 grams
Wetted Parts
Stainless Steel & PTFE
READ ALL INSTRUCTIONS BEFORE OPERATING THIS BINKS PRODUCT.
IMPORTANT! DO NOT DESTROY
It is the customer's responsibility to have all operators and service personnel read and understand this manual.
Contact your local Binks representative for additional copies of this manual.
The Trophy HVLP Series of Spray
Guns can be used to operate
at high transfer efficiencies in
compliance with “California South
Coast Air Quality Management
District” regulations as a High
Volume, Low Pressure spray gun.
II 2 G X
SERVICE MANUAL
