Binks 104165, Руководство по обслуживанию

Страница: 3 / 12

EN
DE-ENERGIZE, DE-PRESSURISE, DISCONNECT AND LOCK OUT
ALL POWER SOURCES DURING MAINTENANCE. Failure to de-
energize, disconnect and lock out all power supplies before
performing equipment maintenance could cause serious injury or
death.
KNOW WHERE AND HOW TO SHUT
OFF THE EQUIPMENT IN CASE OF
AN EMERGENCY.
NOISE LEVELS. The A-weighted sound level of pumping and
spray equipment may exceed 85 dB(A) depending on equipment
settings. Actual noise levels are available on request. It is
recommended that ear protection is worn at all times while
equipment is in use.
PACEMAKER WARNING. You are in
the presence of magnetic fields
which may interfere with the
operation of certain pacemakers.
PROJECTILE HAZARD. You may be
injured by venting liquids or gased
that are released under pressure, or
flying debris.
INSPECT THE EQUIPMENT DAILY. Inspect the equipment for
worn or broken parts on a daily basis. Do not operate the
equipment if you are uncertain about its condition.
HIGH PRESSURE CONSIDERATION. High pressure can cause
serious injury. Relieve all pressure before servicing. Spray from
the gun, hose leaks or ruptured components can inject fluid into
your body and cause extremely serious injury.
KEEP EQUIPMENT GUARDS IN
PLACE. Do not operate the
equipment if the safety devices have
been removed.
STATIC CHARGE. Fluid may develop a static charge that must be
dissipated through proper grounding of the equipment, objects to
be sprayed and alll other electrically conductive objects in the
dispensing area. Improper grounding or sparks can cause a
hazardous condition and result in fire, explosion or elecrtic shock
and other serious injury.
PROP 65 WARNING. WARNING:This product contains chemicals
known to the state of California to cause cancer and birth defects
or other reproductive harm.
PINCH POINT HAZARD. Moving parts
can crush and cut. Pinch points are
any areas where ther are moving
parts.
IT IS THE RESPONSIBILITY OF THE EMPLOYER TO PROVIDE THIS INFORMATION TO THE
OPERATOR OF THE EQUIPMENT.
PRESSURE RELIEF PROCEDURE.
Always follow the pressure relief
procedure in the equipment
instruction manual.
NEVER MODIFY THE EQUIPMENT.
Do not modify the equipment unless
the manufacturer provides written
approval.
OPERATOR TRAINING. All personnel
must be trained before operating
finishing equipment.
EQUIPMENT MISUSE HAZARD. Equipment misuse can cause the
equipment to rupture, malfunction or start unexpectedly and
result in serious injury.
WARNING
Read the following warnings before using this equipment.
READ THE MANUAL. Before operating finishing equipment, read
and understand all safety, operation and maintenance
information provided in the operation manual.
WEAR SAFETY GLASSES. Failure to wear safety glasses with side
shields could result in serious eye injury or blindness.
In this part sheet, the words WARNING, CAUTION and NOTE are used to emphasize important safety
information as follows:
WARNING CAUTION NOTE
Hazards or unsafe practices which could result
in severe personal injury, death or substantial
property damage.
Hazards or unsafe practices which could result
in minor personal injury, product or property
damage
Important installation, operation or
maintenance information.
AUTOMATIC EQUIPMENT. Automatic
equipment may start suddenly
without warning.