Binder KBF-S 240, Руководство по эксплуатации

Страница: 32 / 89

KBF-S (E6) 08/2018 page 32/88
With the arrow-up button you can go back to the temperature set-point entry (chap. 7.1)
With the arrow-down button you can now change to the special controller functions setting (chap. 8)
With the Back button you can go back to the “ Setpoints ” submenu and, repeatedly pressing it, to Nor-
mal display .
8. Special controller functions – Turning off the humidity system
Required access level: “User”.
Turning off humidity control in this menu is required when operating the chamber without water
connection in order to avoid humidity alarms. For further information see chap. 18.
Path: Normal display Setpoints Functions on/off
You can define the switching state of up to 4 controller functions.
Function 1 “Humidity off” serves to turn off the humidification and dehumidification system
With this chamber type the other controller functions are without function .
The functions are displayed from left to right.
Example: Function 1 “Humidity off” activated = 1 000. Function 1 “Humidity off” deactivated = 0 000.
Submenu “ Functions on/off ”.
This view shows the switching states of the four available functions.
“1” = Function activated
“0” = Function deactivated
Functions on/off
Press the OK button to access the first individual function. This is the only accessible function with this
chamber type.
Function 1 “Humidity off”.
The current switching state is shown (example).
Humidity off
Press the OK button to enable the setting.
Setting function 1 “Humidity off”.
The current setting flashes. Use the arrow buttons to select between
0 (deactivated function) and 1 (activated function).
Confirm the setting with the OK button .
Humidity off
With the Back button you can go back to the “ Functions on/off ” submenu and, repeatedly pressing it, to
Normal display .