Binatone SI?2042 VS, Инструкция по эксплуатации

Страница: 5 / 34

5 55 55
ENGLISH
INSTRUCTIONS FOR USE
1. Place the iron into a vertical position.
2. Insert the power plug (13) (13) (13) (13) (13) into the mains
supply outlet.
3. Turn the temperature control knob (10) (10) (10) (10) (10) to
set the temperature recommended by the
manufacturer of the textile article (usually
indicated on the article’s label).
Note: In case the manufacturer’s recommendations are
missing, select the temperature setting, which
corresponds to the type of the cloth to be ironed
(see section “Useful advice”).
4. The operation indicator (11) (11)
(11) (11)
(11) will light up to indicate that the
iron is being heated to the set temperature level. When the set
temperature level is reached, the light indicator (11)
(11)
(11) (11) (11) will turn
off.
Note: during operation of the appliance the light
indicator will light up and turn off periodically;
this is normal and not a malfunction.
Steam ironing
Dry ironing can be can be used at any temperature setting. To
do this the steam control knob (9) (9) (9) (9) (9) must be put into the “0” posi-
tion. If you intend to use the steam function, allow the iron to heat to
the required temperature level then put the control knob (9) (9)
(9) (9)
(9) into
the required position.
Attention: Application of the steam ironing function is
impossible at “•–••” temperature setting. If the
temperature is insufficient to generate steam, water
will start dripping from the sole plate. To avoid this,
always put the steam control knob
(9) into the “0”
position prior to ironing at low temperatures.
Turbo steam
To ease ironing of dense cotton, linen and upholstery articles use
the steam burst button (8) (8) (8) (8) (8): engagement of the button (8) (8) (8) (8) (8) during
the ironing process generates an extra burst of steam from the sole
plate to help remove stubborn creases.
Burst of steam in a vertical position
This function helps to freshen the appearance of curtains, jack-
ets, coats, etc. To use this function, take the following steps:
! Follow instructions in paragraph 1-4 of the section “Operation
instructions”. While selecting the temperature setting, put the
temperature control knob (10) (10) (10) (10) (10) into the “Max” position.
!
While holding the iron in a vertical position, aim its sole plate
towards the articles to be ironed and push the steam burst