Binatone MRHB-8805, Инструкция по эксплуатации, Страница: 5 / 26

5
ENGLISH
SPECIAL SAFETY
PRECAUTIONS
X
Before turning the appliance on for the first
time, make sure that all components of the blender
have been properly installed.
X
Do not apply too much force when installing
the blender attachment, as it may result in the
breakage of the appliance and in the termination
of the warranty.
X
If a smell of burning, foreign sounds or power reduction occur
during the blending process, immediately unplug the appli-
ance from the outlet and clean the blender. If the blender still
malfunctions after cleaning, contact an authorized service cen-
ter.
X
It is recommended that original factory packaging should be
used for the transportation of the blender in order to prevent
its parts from breaking.
X
If the ingredients are hot, allow them to cool before blending
(maximum temperature: 80
0 C). Never blend hot fat or oil with
the blender.
X
Never use the blender to blend paints or solvents.
X
Do not attempt to remove any ingredients when the blender is
in operation.
X
Always turn the appliance off before removing the attach-
ment.
X
The continuous operation of the blender should last for no
more than 1 minute and should be then interrupted for at least
1 minute.
X
The blades of the blender are very sharp. Never touch the
blades of the blender.
X
Turn the blender on only after it has been fully assembled.
Always check whether the appliance has been properly as-
sembled before each use.
DESCRIPTION OF THE
APPLIANCE
Figure A:
1. Blender Body
2. Low Rotation Speed Controller
3. High Rotation Speed Controller
4. Attachment
5. Power Supply Cord