Binatone MEJ-1788, Инструкция по эксплуатации

Страница: 6 / 30

6
After using the appliance let it cool for a few minutes. After that
X
you can boil water in it again.
DESCRIPTION OF COMPONENTS
Metal housing 1.
Hinged lid 2.
Lid opening button 3.
Removable filter 4.
Water level scale 5.
On-off switch 6.
Power indicator 7.
Cord storage base 8.
BEFORE USE
Remove all packing materials from appliance;
make sure that there are no foreign items in it.
Wash internal surface of kettle with warm
soapy water, rinse carefully and wipe dry. In case
of unusual odor fill the kettle up to a maximum level
with vinegar solution (1 element of 9 % vinegar
per 20 elements of water), let the kettle soak for
an hour. Then wash out the kettle with tap water,
boil water in the kettle and pour it out.
INSTRUCTIONS FOR USE
Place the kettle with power base on dry 1.
horizontal surface.
Take the kettle off the base
2.
(8),
open the lid
(2)
by pushing the button
(3)
and fill the kettle
with water.
Make sure the water level stays between the
3.
minimum and the maximum marks on the water
level scale
(5)
. Do not switch on an empty kettle.
Close the lid 4.
(2)
and put the kettle on the base
(8)
.
Put the plug in the socket making sure that the mains supply 5.
matches the voltage requirements indicated on the appliance.
Switch the kettle on by the on/off switch
6.
(6)
. The indicator light
will go on showing that the water is being boiled.
The appliance will automatically turn off as soon as water boils.
7.
You may also manually switch the kettle off before the boiling
process is complete using the on/off switch
(6)
.
While pouring water out of the kettle tilt it slightly and gradually. 8.
Remember that there is hot water inside the kettle.
If water goes cool, and you want to re-boil (or heat) it again, turn
9.
the kettle on again.