Binatone Help Line - 0845 345 9677
Calls are charged at Local Call rate.
24
To go back to
the default
OGM
Answering Machine System continue...
If you no longer want callers to hear the OGMs
that you have recorded, you can delete
revert to the pre-recorded defaults as follows:
1
Make sure the machine is switched on.
Ö
If necessary, press and release the EXIT/
ON-OFF
button to switch to the OGM you want to delete.
2
Press the OGM/REWIND button to play the
current announcement.
While the announcement is playing, press the
1
After playing back all of your messages, press
and hold the DELETE button.
Ö
The display prompts
DELETE ALL?
DELETE ALL?
DELETE ALL?
DELETE ALL?
DELETE ALL?
.
Press the DELETE button again to confirm,
the
display shows "DELETE . . ." and after a short
Ö
The machine will not delete any messages
that you haven’t yet listened to.
3
The display automatically returns to standby
mode.
To delete all
messages
delay, you
will hear, “
All messages erased.
”
DELETE button twice.The display automatically
Ö
Press the OGM/REWIND button to play the
returns to standby mode.
pre-recorded OGM for confirmation.
2
3
them and
11. Remote operation
In standby mode, press the MENU button.
Press the UP or DOWN button until the display
shows REMOTE ACCESS.
Press the MENU button to display your code
setting.
Ö
The default code is ‘321.’
4
Press the EXIT button twice to return to standby
To
check
your
REMOTE
ACCESS code
You can use the Answering System features of Lyris 710
from home. To protect your privacy,
you enter the
three-digit
REMOTE
while the Lyris 710 is being accessed remotely.
REMOTE ACCESS Code.
The base will display
mode.
1
2
3
when you are away
most of the features can be used only after
Содержание Lyris 710
Страница 1: ...1 Lyris 710 Lyris 710 ...
