Clean the battery charging contacts
on the base unit
with a dry cloth.
Check the connections
between the base unit and the
mains power socket.
“I try to
recharge the
batteries, but I
still get a
warning that
they are low.”
You need to
replace the batteries
.
Dispose of used batteries safely
— never burn them,
or put them where they could get punctured.
ALWAYS use the batteries supplied with your iDECT X1i
— other batteries may burst, causing damage.
PBX use
“The Flash
function doesn’t
seem to work.”
You may need to change the lash signal length from
its default of 600 ms. Consult your PBX documentation
for help if necessary. To change the recall setting, use
the
BASE SETTING
menu (page 5 ).
“Last Number
Redial and/or
memory dialling
don’t work on
a PBX.”
When you first make a call, after keying in the outside
line access code (e.g. 9), press and hold the
Last
Number Redial
button until a
P
appears on the
display. This inserts a
pause
between the access code
and the telephone number. You should later be able to
redial the number.
When storing numbers in memory, you can include the
outside line access code
(e.g. 9) with each number.
If your PBX requires you to wait for a
second Dial tone
before dialling the telephone number, press and hold
the
Last Number Redial
button for a pause
between the access code and the number.
Troubleshooting
66
E:\Binatone2006\iDECT_X1i\iDECT_X1i_UK_03.vp
12 June 2006 10:54:07
Color profile: Generic CMYK printer profile
Composite Default screen
F
Use only with SANIK SN-2/3AAA40HJ NiMH 400Ah
1.2V rechargeable battery.
3
