23
This operation should only be necessary if one of your handsets becomes faulty
You will need to enter the 4-digit system PIN (Default PIN is 0000) in order to
Note:
You cannot de-register the handset that you are currently using.
7.4.3
De-register a Handset
de-register a handset from the base station. A de-registered handset will have
1. Press
<MENU/OK>
and <UP/DOWN> to select
BS SETTINGS
.
2. Press
<MENU/OK>
and <UP/DOWN> to select
DELETE HS
.
3. Press
<MENU/OK>
and
the display shows PIN?----
4. Enter the 4-digit system PIN.
5. Press
<MENU/OK>
and
the first handset number
is displayed.
or lost and needs to be replaced.
the antenna flashing and REGISTER on the display.
6. Press <UP/DOWN> to
step through the list of registered handsets, and
select the number of the handset you want to de-register.
7. Press <MENU/OK> to confirm, and the chosen handset will be de-registered.
7.4.
1. Press <MENU/OK> and <UP/DOWN> to select
BS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select
DIAL MODE.
3. Press <MENU/OK> and <UP/DOWN> to select
TONE
or
PULSE
(The current setting is indicated by an asterisk to the right).
4. Press <MENU/OK> to confirm.
You should normally leave the dialling mode at its default setting of TONE (also
Note:
If PULSE dialling is set, you can press the * key to switch to TONE
recognises
PULSE
dialling.
7.4.
1. Press <MENU/OK> and <UP/DOWN> to select
BS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select
FLASH TIME.
3. Press <MENU/OK> and <UP/DOWN> to select your desired flash time
4. Press <MENU/OK> to confirm.
You may need to change the recall (flash) time if your phone is connected to a
PBX. The recall time options are SHORT (the default value of 100ms),
0ms) or
LONG (600ms).
30
LONG,
with the current setting indicated by and asterisk
MEDIUM (
called DTMF) unless the phone is connected to an old exchange that only
(SHORT,MEDIUM,
to the right).
dialling for the rest of that call.
4
Change the dial mode
5 Change the Flash (Recall) Time
7.4.
A 4-digit system PIN code is used for changing the system settings of the base
station. It is used to protect your phone against unauthorised use. The default
system PIN code is 0000.
1. Press <MENU/OK> and <UP/DOWN> to select
BS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select
CHANGE PIN.
6 Change the System PIN Code
