Binatone GK-1770, Руководство пользователя

Страница: 4 / 35

5
► Do not use the appliance if it has been dropped, or
with a damaged power cord or plug. Do not attempt to
modify or repair the machine yourself.
► Do not attempt to dismantle the appliance as improper
assembly might result in an electric shock during the
subsequent use of the equipment.
► Repairs should only be done by authorized service
centers.
► This equipment is intended for household use only,
not for commercial or industrial use.
► Please follow all the instructions, guidelines and
requirements of this guide.
► Do not use the appliance if it has mechanical defects
(dents, cracks etc.), get it checked by the nearest
authorized service center.
► To avoid mechanical defects and damage, take care
during appliance transportation.
SPECIAL SAFETY
MEASURES
► Make sure that the water level
is between the minimum and
maximum level before turning
the kettle on. Do not overfill the
kettle; otherwise it can overflow
while boiling. Please, remember that the minimum water
level should be higher than the minimum allowed level.
► Do not touch the hot surfaces of the appliance. Do not
touch the outer surfaces of the kettle with the exception
of the heat insulated handle, when water is boiling or
with hot water inside the device.
► Allow the kettle to cool, prior to cleaning and storing.
► Disconnect the appliance from the electricity supply
before storage, before filling it with water/emptying it or
moving it from one place to another.
► The appliance should always be placed and used, on a
heat resistant, horizontal and dry surface.
► To avoid being burnt by hot vapour always close the
lid tightly before use. Avoid exposure to hot vapour.
WARNING! Never open the lid immediately before
or after boiling temperature is reached.
► The kettle is protected against overheating and if
switched on without water, an automatic safety cut out
device will switch it off. If the safety device is activated,
allow the kettle to cool down prior to boiling water in it.
The kettle will not switch on if it’s too hot. WARNING!
Frequent switching on of the kettle without water
might result in the failure of the safety device,
that is why prior to switching on the kettle, always
check the water level. Always make sure the water
level in the kettle is not too low.