9
2.3
2.3
2.3
2.3
Installing and Charging the Rechargeable Batteries
Installing and Charging the Rechargeable Batteries
Installing and Charging the Rechargeable Batteries
Installing and Charging the Rechargeable Batteries in an Additional
in an Additional
in an Additional
in an Additional
Handset
Handset
Handset
Handset
1)
Insert the 2 supplied batteries into the battery
compartment, observing the correct polarity
(see markings inside battery compartment).
Warning:
Warning:
Warning:
Warning: Use only the supplied NiMH rechargeable
batteries.
2)
Place the back cover over the back of the
handset and press down until it clicks into
place.
3)
Place the handset on the charging pod and
charge for 15 hours before using the handset
for the first time.
•
The handset will give a double beep when
it is properly placed on the charging pod
and the battery charging indicator on the charging pod lights
up to indicate charging.
2.4
2.4
2.4
2.4
Removing the back co
Removing the back co
Removing the back co
Removing the back cover
ver
ver
ver of the Main
of the Main
of the Main
of the Main
Eclipse Handset
Eclipse Handset
Eclipse Handset
Eclipse Handset
Insert the supplied key into the groove as
indicated in the illustration and twist it
clockwise to release the back cover.
If you have a
If you have a
If you have a
If you have a bbbbroadband line
roadband line
roadband line
roadband line
If you connect your telephone to a line with a
broadband connection, you will need to insert a
micro-filter between the telephone and the telephone line; otherwise
you may get interference between the telephone and the broadband,
which could cause problems.
In a home with broadband, every telephone must have a micro-filter
connected, not just the one at the telephone point that your modem is
connected to.
If you need more broadband micro-filters contact your broadband
supplier.
