PBX use
“The Recall
function doesn’t
seem to work.”
You may need to press and hold the R button for a
couple of seconds, rather than pressing it briefly. Try
this and see if it works.
“Last Number
Redial and/or
memory dialling
don’t work on
a PBX.”
When you first make a call, press the Redial/CDS/P
button for a
pause
between the outside line access
code (e.g. 9) and the telephone number. You should
later be able to redial the number.
When storing numbers in memory, you can include the
outside line access code
(e.g. 9) with each number.
If your PBX requires you to wait for a
second Dial tone
before dialling the telephone number, press the
Redial/CDS/P button for a pause between the access
code and the number.
You can also set up your
e
820 so that it
automatically
inserts a 2-second pause
after you dial the outside line
access code, as follows:
1
Press the
PROG
button then
2 5 0
2
Key in the line access code (up to four
digits)
3
Press the
PHONE/OK
button to confirm
Troubleshooting
51
E:\Binatone2004\e820\e820_UK_03.vp
15 November 2004 11:48:23
Color profile: Generic CMYK printer profile
Composite Default screen
All manuals and user guides at all-guides.com