“The Caller
Display feature
isn’t working.”
You need to
subscribe
to the Caller Display feature
from BT or your service provider.
The caller may have
withheld
their number by dialling
141. Or they may be calling from a network that does
not transmit the Caller ID (for example, it may be an
international call).
“I’ve tried
several times to
make a call, but
I hear Busy tone
and the IN USE
light on the
base unit does
not come on.”
Check your handset’s display — if it says either
not sub
or
base . . . .
, you need to re-register the
handset, as described on page 34.
If the display says
search 1
, make sure the mains
power lead is plugged into the back of the base unit,
and the adapter is plugged into the mains socket with
the power switched on.
If you have more than one handset registered to your
base unit, check that another handset isn’t already in
use on a call.
Multi-handset use
“I can’t transfer
a call.”
Make sure the other handset is within range of the base
unit, and is not busy on a call.
Make sure you are keying in the correct number (
1
to
5
) for the other handset.
Batteries
“The handset‘s
batteries are
running low
within an
hour or two.”
Before you first used the handset, you should have left it
on the base unit or charger pod for
up to 15 hours
to
charge the batteries fully.
You may need to
replace the batteries
(see overleaf).
Troubleshooting
Binatone Help Line:
01325 304 473
43
E:\Binatone2003\MD1600\MD1600_03.vp
09 June 2003 15:22:16
Color profile: Generic CMYK printer profile
Composite Default screen
