background image

Cliptel 50

page 8

page 1

USER GUIDE

One-touch memory buttons

Hook switch

Ringer volume control

OFF–LOW–HIGH
If this is set to OFF, the
phone will not ring.

SECRECY button

Press this during a call to prevent
the caller from hearing you.
Press it again when you want to
be heard again.

RECALL button

You will need this if your phone is
connected to a PBX, or if you use BT’s
Select Services.

PAUSE button

You may need this if your phone is
connected to a PBX.

‘NEW CALL’ light

This flashes when there has been an incoming call, until you have
checked the caller’s ID. It is on steadily when you are dialling on-hook.

UP

DOWN

C

OK

phone book

new call

11-05-52a

Display

When the handset is on hook, this shows the time.
See page 3 for more details of display symbols and messages.

REDIAL button  —

Multi-Redial

press this to display the

last number you dialled.
For

, you can then press      or

(see below) to scroll through the last five
dialled numbers.
When the number you want is shown on the
display, press         to dial it.

OK

MENU buttons

… shown in the instructions like this

The

take you through a

range of options on the display, as shown —

MENU buttons

PHONE BOOK button

For storing, calling and deleting numbers
in your 50-number Phone Book

While you are using these
buttons, your line will be
Busy, even if the handset is
on hook.
Ignore any

tones you hear

from the exchange.

recorded

messages or

CALLER ID

KEYBEEP

BABYCALL

SETTINGS

TIME ACCT

STORE

Press

Press

Press

or

to bring the menu up on the display, and

to select the option on the display, and go to the next level

to move back one level and to quit ‘menu mode’

to scroll through the

menu options

You can do this with the handset on-hook or off-hook.

For details of each feature, see the relevant page of this guide.

… or you can simply replace the handset to quit.

or if you wait for one minute without pressing a button, the

phone will automatically quit ‘menu mode’ and show the time.

THE DISPLAY MAY BE BLANK FOR A FEW MOMENTS BEFORE SHOWING THE TIME.

OK

C

If you need help, call the Binatone Help Line

9.00 am to 5.00 pm, Monday to Friday

020 8 344 8870

Model 2982

Technical details

Temperature range

Operating 0ºC to 40ºC
Storage -20ºC to 60ºC

Approvals

ETS 300-001, PD7010

PBX compatibility

100 ms timed break recall
Pause length: 3 seconds
Signalling type: DTMF (dual tone multi-
frequency), also called tone dialling

The five numbers stored in the Redial memories can have up to
32 digits each.

.

Binatone Telecom plc operates a policy of continuous product improvement,
and so reserves the right to make changes to the product and functions
without notice

The Cliptel 50 must be serviced by trained engineers. NEVER
attempt any repairs or adjustments yourself — you could make
the problem worse and invalidate the Guarantee.

Always make sure your Cliptel 50 is fully plugged into the
telephone line socket.

Check that the ringer volume switch on the side of the
handset is not set to OFF.

Check that the total REN value of all equipment connected to
your telephone line is no more than 4. Disconnect one or
more telephones and see whether that helps.

Disconnect all other instruments connected to the same line
as the Cliptel 50 and see whether you can make a call.

Disconnect the Cliptel 50 from the telephone line and plug a
different telephone into the socket. Try making a call. If this
works, the line is OK.

If you are using a two-way socket adapter, remove it and
plug a telephone directly into the socket. If the call now
works, the adapter may be faulty.

If you think the fault may be on the exchange line, contact
the service provider (the BT engineers on 151, or your cable
company).

n

n

n

n

n

n

n

If you still cannot identify the cause of the problem, contact
the Binatone Help Line.

Troubleshooting

If the phone does not ring …

If you cannot make calls …

Do not clean any part of
your Cliptel 50 with solvent
chemicals, abrasives or
spray cleaners which might
get inside the case and
cause damage not covered
by the guarantee. When
necessary, clean it with a
damp cloth.

Keep your Cliptel 50 away
from hot, humid conditions
or strong sunlight.

Отзывы: