Telephone operation continue...
11
During a call, the phone mutes the microphone
or the mouthpiece so that the person on the
other end cannot hear you.
1
Press MUTE button once.
Ö
While the microphone is muted,
MUTE
MUTE
MUTE
MUTE
MUTE
will
be shown on the lower right corner of the display.
2
Press MUTE button again to get back to the call.
Inserting a
For some switchboard systems, an access number
Pause in the
must be dialed (usually an 8 or 9) to get another
dialing
dial tone and an outside line. Pressing
REDIAL/
sequence
PAUSE
button immediately after the access number,
a pause of about 3.6 secs. will be entered, and the
desired number can be dialed immediately.
Press REDIAL/PAUSE button to insert a pause when
dialing or storing Long Distance Access Codes.
To mute the
mouthpiece or
microphone
1 In standby mode, press STORE button.
2 Enter the telephone number, up to 22 digits.
Ö
The memory cannot exceed 22 digits during
programming and if exceeded, the memory will
not store the number.
3
Press the desired memory location (M1
,
M2
,
or
M3) button.
Note: When the Memory buttons are full and
you wish to store a new number in memory,
follow steps 1 to
3
. The new number will
replace the old number stored in memory.
Storing a
Number in a
One-Touch
memory
Speed
1
Lift the Handset, or press SPEAKERPHONE
dialing
button on the Base unit.
2
Press the One Touch memory location M1,M2,
or M3 button.
Ö
The number dials automatically.
STORE
MUTE
RD/P
All manuals and user guides at all-guides.com
all-guides.com