To Turn ON;
To switch OFF;
3
. Operation
3
.1 Transmitting range
The talk range depends on the
environment
and terrain. It will
reach up to about
10
km in wide open spaces, without obstructions
such as hills or buildings. Don’t try to use two PMR units which are
less than 1.5m (5 foot)
apart, otherwise you may experience
interference.
Important safety warning
To reduce radio frequency exposure when you are using your
Action 950
, hold the unit at least 5cm (2 inches) away from your face.
Never use your
Action 950
outdoors during a thunderstorm.
Don’t use the
Action 950
in the rain.
If your
Action 950
gets wet, turn it off and remove he battery.
Keep the
Action 950
out of reach babies and young children.
Dry the battery compartment and leave the cover off for a few
hours. Don' t use the unit until it is completely dry.
a.
Rotate the
POWER/VOL
button clockwise until the LCD
Screen turns ON and displays the current channel.
b.
Rotate the
POWER/VOL
button counter clockwise until
the LCD screen turns blank.
Note:
When you rotate the
PWR/VOL
button to turn ON, the
volume will also turn on at its minimum level and will
3.2 Turning the Unit ON/OFF
3.3 Changing Channels
The
Action 950
has 8 available main channels, To
Action 950
users within range,
the same channel.
a.
Press the
MENU
button once, the current channel
number flashes on the LCD Screen.
b.
Press the
UP
or
DOWN
button to select the desired
channel. The channel changes from 1 to 8, or vice versa.
c.
Press the
PTT
button to confirm the channel setting.
Note:
Refer to the “Channel Table” section of this Owner’s Manual
for detailed frequency listing.
Each channel also has 38 sub-channels to let you set up
a group of users within the same channel for more private
communication. If you have set the sub-channel, you can
PMR users tuned to the same
To turn the sub-channel function off
, simply set the
sub- channel to 0 (zero). You can communicate with any
same channel who also turns off the
sub-channel
operation (
or with units that do not have this
a.
sub-channel number flashes on the LCD Screen.
b.
CTCSS sub-channels.
c.
Press the
PTT
button to confirm the sub-channel setting.
3.3.1 Setting the CTCSS sub-channel
Press the
MENU
button twice,the current CTCSS
Press the
UP
or
DOWN
button to select one of the 38
communicate with other
you must all have your
Action 950
tuned to
only communicate with other
channel and sub-channel.
Action 950
user set to the
feature
).
Your Action 950 has 968 Channel Combinations
increase as the button is rotated further.