Binary B-660-EXT-444-100A, Руководство по установке, Страница: 10 / 20

10
5. INSTALLATION AND WIRING
5.1. Installation
Before installation, please ensure the device is disconnected from the power supply.
Steps to install the device on a suitable position:
1. Attach the mounting ears to the enclosure using the screws provided in the package.
2. The mounting ear is attached to the enclosure as shown.
3. Repeat steps 1-2 for the other side of the transmitter.
4. Mount the transmitter in the rack mount with the mounting screws.
5. Repeat steps 1-4 to install the receiver.
5.2. Wiring
Warnings:
• Before wiring, disconnect the power from all devices.
• During wiring, connect and disconnect the cables gently.
Steps for device wiring:
1. Connect HDMI IN
Connect the HDMI sources (such as PC, Blu-ray player, Apple TV, 4K media player, etc) to
the HDMI IN of the transmitter.
2. Connect HDBT OUT
Connect HDBT OUT of the transmitter to HDBT IN of the receiver with Cat 5e/6/7 cables.
3. Connect HDMI OUT
Connect HDMI display device (such as TV, projector) to the HDMI OUT of the receiver.
4. Connect for additional control options:
• IR Pass Through: Connect IR emitter cable to IR Flasher port or IR receiver cable to IR
Receiver port of the transmitter, and connect IR receiver cable to IR Receiver port or
IR emitter cable to IR Flasher port of the receiver. The source remote can control the
source at receiver side, the display remote can control display at the transmitter side.
• RS-232 Pass Through: To set RS-232 mode see “Function Setting” Section, below.
Connect control devices such as PC to RS-232 ports of transmitter and receiver to
realize RS-232 pass through. For details, see RS-232 Control Connections Section.
• ETHERNET Pass Through: Connect Network port of transmitter or receiver to the local
network, connect a PC to the Network port of receiver or transmitter, the PC can be
connected to the local network.
5. Connect the DC 12V power cord provided.
6. Power on all attached devices.