Hardware connection schematic diagram
2.4G Bridge
5.8G Bridge (1)
5.8G Bridge (2)
Interface Descriptions
DIP Switch: To adjust the transformation between the main AP mode and
the secondary AP mode of the bridge.
DC: Power interface,12V 1A DC power interface.
Digital Switch/Reset: Both digital switch and reset button, short press the
button when electrifying, the numeric value of the digital tube will be
added one and press 15 seconds, the device will be restored to the
factory setting.
2
.
4G Bridge
LAN1/POE: This is a data transmission port, and it is also a power port.
When the device works in the bridge mode, the interface acts as a LAN
port function. When the device works in the route mode, the interface acts
as a WAN port function. This interface is used to connect the POE
interface to the POE power.
LAN2: This is a LAN data transmission port which can connect computers,
cameras, switches and other devices.
1 - English
