#5
#6
#4
#5
STEP 2:
Insert and fasten 8 horizontal slide rails
(#7)
into front grid assembly using 8 – #06 x ½
in. fastening screws
(#1).
Note: Fasteners in
bottom hole only, work from bottom row to
top row
Place 4 wall mount bracket
(#06)
over 4
rear verticals above 2
nd
horizontal crossbar
(#1)
and fasten to wall using 8 – #10 x 1¼
fastening screws.
(#2)
.
STEP 2:
Make sure unit is straight and square, and
all verticals are pressed firmly together and
against alignment dimples.
Note: If mounting into drywall or masonry,
mark and drill ¼ holes and insert plastic
wall anchors – and proceed with step 1
– Insert decorative top caps
(#4)
into all
verticals.
STEP 1:
Join front to rear grid by inserting 4 front & rear grid
connecting tubes
(#5)
into front grid assembly
Note: Do not fasten at this time
STEP 3:
Turn unit upright and place firmly against
wall where unit is to be mounted.
STEP 1:
Fasten 4 front & rear grid connecting tubes
(#5)
to front grid assembly using
8
– #06 x ½ in. fastening screws
(#1)
.
STEP 3:
Fasten all verticals to horizontals making
sure all joints are pressed firmly together and
tight against alignment dimples using 24 –
#06 x
½
in. fastening screws
(#1)
Note: Fasteners in holes facing YOU only.
Unit must be attached to wall
to keep from tipping over!
Congratulations! We hope you
enjoy your Bin Warehouse file
box storage rack!
JOINING FRONT TO REAR GRID
Alignment
dimple
FASTENING VERTICALS & FRONT & REAR GRID CONNECTING TUBES
FASTENING TO WALL
