BimmerTech BMW F10 Carplay MMI Prime, Инструкция по установке и эксплуатации

Страница: 24 / 41

Installation Instructions - BMW F10 CarPlay MMI Prime
Some mesh grilles might require the use of a dremel tool to trim the lower grille ever so slightly to
allow the installation of the camera. Be sure not to trim too much. Then slide the heat shrink provided
with the front camera over one of the cables making sure the small white connectors are firmly
attached to each other. Confirm the camera works and heat up the heat shrink carefully making sure
not to disconnect the connectors inside. The heat shrink has thermal glue inside which has very good
moisture isolation properties but is also really hard to remove if you make a mistake.
The heat shrink should be applied in a manner to cover all other heat shrink sleeves near the
connections for best isolation from the elements.
To remove the front bumper panel:
BimmerTech FZE | Phone: +1(646) 439-7920 | www.bimmer-tech.net 24