BIMG METVISA LQ.19 Series, Инструкция по эксплуатации, Страница: 11 / 24

11
All models of the appliances described in this manual are single-phase and have a single
voltage, wither 110 V or 220 V. If you need to change the voltage on your appliance, contact the
manufacturer or an authorized dealer.
ATTENTION!
Before connecting your appliance, always check that the supply voltage of the network is
the same as the voltage of the appliance.
The supply voltage of the appliances is 110 V (60 Hz) or 220 V (60 or 50 Hz), as can be
verified on the voltage label attached to the power cord or as indicated on the data label of
the board located on the back of the appliance (view the picture of this label in item 2.2 of
this manual).
Make sure that the power grid voltage where the appliance will be installed is compatible
with the voltage indicated on these labels.
For details of the remainder of the electrical part of the equipment, refer to the electrical
schema in the manual annexes (pgs. 19 to 20).
IMPORTANT
The manufacturer shall not be liable for any direct or indirect damages caused by non-
compliance with these standards and other instructions presented in this manual.
3.3 Safety Measures and User Instruction
The professional that makes the sale of the equipment should instruct the user about the
correct operation of the equipment and should give you this instruction manual.
The user must be informed of the necessary safety measures and must respect them as well
as all the measures described in this manual.
Your appliance has mechanical protections (see item 1.2 Mechanical Safety) that prevent
access to moving parts and electrical components. Removal or tampering with these safety
components can cause serious risks to the operator's upper limbs.
4. Use of the Appliance
4.1 Utility
The appliance is intended exclusively for crushing various foodstuffs with the addition of liquid.