BIMG Metvisa FTG.150B, Инструкция по эксплуатации

Страница: 4 / 44

4
1. Safety Information
1.1 General Warnings
• Cautions / precautions must be observed when installing, using, maintaining and discontinuing use of
this equipment;
• Before carrying out any operation (assembly, use (use), maintenance and reuse after prolonged use
of the equipment), read the manual carefully;
• The equipment must be used by trained personnel familiar with the use and safety regulations
described in this manual;
• This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capacities, or people with lack of experience and knowledge, unless they have received
instructions regarding the use of the device or are under the supervision of a person responsible for
their safety.
• It is recommended that children be supervised to ensure that they are not playing with the equipment;
• In case of alternation of the personnel that will work with the equipment, the new operator must be
educated about the standards and the operation of the same one;
• The operator must use the
Adequate PPE (equipment for individual safety). For example: suitable
gloves protecting the hands from burns by heating the oven;
• The operator must always be aware of situations that can cause a risk of accidents and avoid them.
For example: turning the equipment on even with gas leakage. Gas in the environment causes
intoxication, fire and explosion hazards;
• After being held to read and answered all the questions, this manual must be stored carefully in place
of easy access, known by all the people who will operate the equipment and made available for the
people who carry out maintenance, to any queries. When in doubt, consult the manual. Do not
operate the equipment in any way with doubts;
• In the installation, it is essential to make this manual available to the professionals who will do the
same;
• Do not install the equipment near flammable materials;
• Before starting cleaning and any kind of maintenance, it is essential that the equipment is disconnected
from the mains, the gas supply valve of the kiln and the gas valves of the cylinders are closed and the
inside of the oven at room temperature;
• Periodically check the condition of the cables and electrical parts, the hose and the entire gas
installation part as well as the internal and external part of the equipment (burners, oven interior, gas
inlet valve, etc.).
CAUTION!
Do not perform repairs on your own. Refer servicing to qualified service personnel. Use only
original parts in your device.