BIMG Metvisa DG.10, Инструкция по эксплуатации, Страница: 11 / 21

11
WARNING!
Never turn on the device with the Beater, Bowl or Bowl Protection out of position, because it
could cause accidents.
•
Operation: Before turning on the device, be sure that the demountable components (Bowl, Beater e
Strainer) are well seated, the Door is locked by the Lev
er, and the device’s voltage is according to the
electrical outlet.
After verified all those items, follow the operation procedures:
• Connect the power cord to the electrical outlet;
• Set a container down the Bowl to store the pulp that exits from the Tube;
• Add fruits and some water;
• Turn the power switch to "1" (on), at which point the beater begins to rotate. Leave the appliance on
for a few seconds;
• Keep adding water until stops exiting pulp from the Bowl Tube;
• Place another container down the Gutter to collect waste from process;
• While device is turned on, open the Bowl Door using the Lever and add water on the Bowl to remove
all waste through the Gutter;
• After the process finishes, press position “0” (OFF) on the On/Off Switch.
WARNING!
Keep your device turned on when refill the Bowl with fruits.
If the device cannot process the pulp or stops processing, reduce the quantity of fruits,
before inserting on the Bowl. Do this not to prejudice speed and performance of the electric
motor, and the life cycle of the device.
WARNING!
Never place hands, fingers or objects (spoons and knifes) through Bowl Protection and on
other mobile parts while device is turned on, it might cause an accident.
Any irregularity contact the nearest authorized service.