ASSEMBLY INSTRUCTIONS
© 2020 TRINITY - 800.985.5506
3
STEP 3
E (2)
F (2)
G (16)
Carefully lay BOTTOM CHEST (B) on its backside.
Two people are needed. Do NOT attempt this alone.
Position LOCKING CASTERS (E) on side of BOTTOM
CHEST (B) of your choice and align holes to pre-
installed nuts on underside of BOTTOM CHEST (B).
Use a 14mm socket wrench to fully tighten CASTER
BOLTS (G) to BOTTOM CHEST (B).
Repeat to install NON-LOCKING CASTERS (F).
Notes:
* Make sure to install both LOCKING CASTERS (E) on
same side of tool chest.
** For ease of use, place LOCKING CASTERS (E) on
side you will regularly push or pull.
*** If you plan to push tool chest against a wall,
place LOCKING CASTERS (E) on front long side for
ease of access.
14mm
B
H (2)
STEP 4
E
F
G
I (8)
B (1)
With two people, stand BOTTOM CHEST (B) back
up, carefully place TOP CHEST (A) on top of
BOTTOM CHEST (B). Be sure to assemble REAR
BRACES (H) to secure TOP CHEST (A) to BOTTOM
CHEST (B).
Position REAR BRACE (H) over pre-installed nuts
at back edge where two CHESTS (A+B) adjoin.
Insert BRACE SCREWS (I) to holes on REAR
BRACE (H) and tighten securely.
Repeat to install second REAR BRACE (H).
Phillips
A
B
H
I