Bilt TRINITY TBTPBK-0915, Руководство пользователя

Страница: 3 / 12

© 2020 TRINITY - 800.985.5506
ASSEMBLY INSTRUCTIONS
2
A (4) E (4) F (4)
STEP 1
Stationary Option
Screw each FEET LEVELER (F) into bottom of each
BOTTOM POLE (A). Turn clockwise to screw in place.
Mobile Option
Screw each CASTER (E) into bottom of each BOTTOM
POLE (A). Turn clockwise to screw in place. Make sure
locking casters are on the same side.
Use provided caster wrench to tighten completely.
Failure to do as instructed could result in caster stem
breaking.
For easiest assembly, do not attach TOP POLES (B) and
BOTTOM POLES (A) until instructed. Once connected,
these will be posts for the rack.
Note that POLES (A+B) have slight horizontal line
indentations at 1” intervals. Each SLIP SLEEVE (D) has
raised horizontal lines inside designed to lock them in
place on POLES (A+B).
On BOTTOM POLE (A), place one pair of SLIP SLEEVES (D)
at desired height
no higher than 3rd indentation from
bottom. Please make sure arrow faces up and word “TOP”
is right side up.
Slide pair of SLIP SLEEVES (D) until you hear a click to
confirm the pair is locked onto BOTTOM POLE (A). Do this
for each BOTTOM POLE (A) and make sure height is
identical for each BOTTOM POLE (A). Do NOT place more
than one pair on each pole at a time.
A (4) D (8)
Note: There will be a very small gap in-between two locked SLIP SLEEVES (D) — this is normal.
STEP 2