© 2021 TRINITY - 800.985.5506
6
ASSEMBLY INSTRUCTIONS
Place two WALL BRACKETS (B) to overhang Wood Top bottom
as shown. Make sure that one side of WALL BRACKETS (B)
attach to Wood Top bottom and the other side attach to wall.
Make sure one bracket is as close as possible to end of
unsupported end of wood top.
Mark off mounting location on wall through holes on WALL
BRACKET (B). If WALL ANCHORS (C) are required, drill holes in
marked locations. Insert WALL ANCHOR (C) completely into
each drilled hole.
Insert WOOD SCREW (A) into holes on WALL BRACKET (B) and
tighten them fully to Wood Top bottom with an electric
screwdriver (Phillips head).
Fasten WALL SCREWS (D) through holes on WALL BRACKET (B)
into the wall or anchors tightly with an electric screwdriver
(Phillips head).
Note
: Please consult a local contractor if you are unsure if
your wall is able to bear the load of the Wood Top.
A (4)
B (2)
C (4)
D (4)
Wood Top
Base Cabinet
Step 3
Option 2
(Installation with Wood Top Overhang)
C
B
A
Wood Top
Bottom
D
