24 |
P a g e
Step 17
. Insert the connector of the ignition wire to the terminal of the ignition electrode
on the side burner assembly, as shown below.
Insert the
Control Knob (11)
to the pin on the side burner valve. Apply light pressure
to secure the knob firmly. Make sure that the flat end of the pin is aligned with the D-
shaped hole of the control knob (with the triangle pointing upwards).
Step 18
. Disassemble the
Grease Collecting Tray Handle (32)
from the
Grease
Collecting Tray (13)
then reassemble the handle to the tray by using 2 pcs pre-
attached bolts
M6x12 bolts (C)
as shown below. Be sure the handle is facing outward.
Содержание 980302550
Страница 7: ...7 P a g e Package Contents...
