BILT HARD TL-PW-336, Руководство оператора

Страница: 15 / 23

1
3
ASSEMBLY
Adding / Checking Engine Oil (See fig 6)
• Place pressure washer on a level surface.
•
•
Carefully add between 520 ml (17.6 oz) of 4-Cycle engine oil (SAE10W30) to empty reservoir until oil reaches
• Be sure to replace both dipsticks before attempting to start the engine.
• To check oil, set pressure washer on a level surface, wipe dipstick clean, then reinsert dipstick without re-threading.
Adding Fuel (See fig 7)
• Set pressure washer on a clean and level surface in an area that is well ventilated.
• Remove fuel cap.
• Insert a funnel into the fuel tank and carefully pour gasoline into the tank until fuel level reaches 1 1/2 inches below the
top of the neck.
CAUTION!
CAUTION!
FIG 6
10W30 OIL
FIG 7
Gasoline
Unleaded