Door Frame Assembly – All Models
Figure 1 - Front
Figure 2 - Rear
Plastic Runner for
TOP
of door Frame
Cross Member
Please note it is advisable to build the
door frame starting from the top, place
the cross member between the two
door frame edges and secure using the
plastic runners and the securing
screws. (figure 1&2) Do not tighten
until the plastic runner is in the correct
place. This will move up and down as
required.
Note how the cross members are
slotted into the frame edge (figure 3 ).
Please make sure that the plastic
runners are placed the correct way
around for the top of the frame and
the bottom of the frame. (
T
shape for
top and
U
shape for the bottom ) Once
the cross member is secure at the top
of the frame place the glazing in the
frame and then place the next cross
member between the two frame edges
and secure with the screws provided
(figure 4). Please note the correct
fitting for the bottom plastic runner.
(figure 5).
